 
We make a selection of adhesive backed outer and inner edge Graduated Dials (GD) ready to mount on tools and other equipment. Outer edge dials have a 1/4" diameter reference hole while inner edge dials have an inside hole 1" smaller than the outside diameter. Three basic styles are available: 0-360 degrees clockwise (CW), 0-360 degrees counter-clockwise (CCW) and 0-180-0 degrees dual directional (DD). Graphics are black on a white background with a 1 degree resolution and come with a 5 mil thick Mylar topcoat for chemical and abrasion resistance. Oregon Rule Company can provide aluminum plate backing and bolt holes. Special diameters, segments, colors and/or other resolutions are also available.
Setting Circles for Stargazers - They Glow-in-the-Dark!
In addition to our standard setting circles we have expanded our selection to include phosphorescent (glow-in-the-dark) adhesive-backed or magnetic-backed and black/white magnetic-backed. All have a 1mil polyester matte finish topcoat for chemical and abrasion resistance and come with a 11/32" diameter pilot hole. The phosphorescent media can remain clearly visible to the acclimated eye up to 8 hours. The magnetic-backed circles, for use on ferrous surfaces, are easy to apply and offer phase adjusting to fixed pointers.
Degree Strips (wrap around diameters)
More information on this product call our sales department!
|
