Forensics Products
sales@oregonrule.com


 
Security Height Rules


Security Height Rule

Oregon Rule Co.'s adhesive Security Height Rule is a bold, clear scale for quickly referencing height.  Often, these rules are seen around the door frames of businesses as you exit, at police stations, in schools, and in doctors’ offices. The high-tack adhesive backing allows this rule to be stuck on nearly any clean surface.

The Security Height Rule itself is 37” long and nearly 2” wide. The increment readings are in a scale range most likely to capture human adults, 3’8” to 6’8”. The scale is designed with minimal (yet thick and readable) graduations at every 1/2”. Tic-marks run the length of the rule on both the left and right sides. Graphics and numbers are black on a white background. Customizations, like colors, materials, and private labeling are available, please contact an Oregon Rule Co. sales associate for more information.


To apply the adhesive rule, measure 3’8” from the ground and mark this area, or keep its reference in some way. It is recommended to first clean the area this rule will be applied to with an alcohol based cleaner. Grease, dust, and other obstructions can degrade the Security Height Rule, its adhesive properties, or make it otherwise inaccurate. Begin to peel the backing from the face of the ruler starting from the bottom. Set this new sticky bottom section onto a wall lining up your 3’8” mark to the 3’8” tic-mark on the rule. Without having pulled the lining from the back of the unit completely off yet, hold the ruler up against the wall to judge how straight you will be laying this down upon the surface (much easier to do now than when the entire sticky back is exposed). After making any adjustments, slowly peel the liner off, starting at the bottom, and firmly press the newly sticky section against the wall. This can be done in a fluid motion, removing the liner and pressing the rule down, using two hands and some concentration. Optionally, you can lay this scale onto a surface with a reference ruler next to it, like a yardstick, and line up measurements in case the material needs to be stretched or otherwise adjusted for more intense accuracy.
Part Number
Description
Price
SHR/F-W1.88x44/80VU-TC
1 7/8" wide, 37" long, reading 3'8" to 6'8"
$6.45 each
 

Security Height Rule - Fractional/Metric - 80" Long
 

This is a new version of Security Height Rule from Oregon Rule Co., boldly showing both inch and centimeter increments, and reading up to 80" (203cm). This adhesive scale has large numbers and a sharp, clean design, which makes it easily read from a great distance. It has many practical uses, such as, in the door frames of businesses, at doctors offices, and in your home. The high-tack adhesive backing allows this rule to be stuck on nearly any clean surface.

The dimensions of the rule itself are as follows: Each is 1 1/2" wide and read up to 80"/203cm (plus 1 additional inch for the header). The increments are 1/4" on the left side, and 1/2 centimeters on the right. Graphics and numbers are black on a white background. Customizations, like different colors (background and/or graphics), materials, and private labeling are available. Please contact an Oregon Rule Co. sales associate for more information and a quote.

To apply this item, first clean the area this rule is going to be affixed to with acetone or a similar alcohol based cleaner. The bottom of this Security Height Rule starts at 0, so begin by lining up this edge with the absolute bottom edge of your intended surface. Use another solid/non-malleable ruler (yard stick, tape measure, etc.) alongside this ruler-application process so you can tension the rule length to stay perfectly accurate. Peel the liner off the backside of the bottom end slowly, revealing the adhesive, and press firmly onto the wall. Continue to pull liner, reveal adhesive, and press onto surface with two hands, until you reach the top. Doing it this way is much easier than managing a long ruler with its entire adhesive exposed at once (imagine the messy tape clusters that can occur when wrapping a gift, multiplied by over 6 feet).

 
 
Part Number
Description
Price
SHR/FM-W1.5x80VU-TC
Security Height Rule, Inches/Feet and Centimeter graduations, 1 1/2" wide, reads 80"
$9.50 each

Kids Height Rule
 

Kids Height Rules were designed by Oregon Rule Co. to add a fun flavor to our Height Rule product line. These sturdy adhesive rules are a glamorous addition to any childs' bedroom or pediatrician's office.

The dimensions of the Kids Height Rule itself is 4" wide and reads up to 80" (actual size is 81" giving space for the header). The graduations are 1/4" throughout, with lines extending to the right. The reason for all the space to the right of the numbering, is to create room for a family to write notes and to immortalize the growth trend of their child.

Customizations, like colors, materials, and private labeling are available. In the past, we have designed variations for "girl" and "boy" versions with different accented colors and images. Please contact an ORC Forensics sales associate for more details and a quote.

To apply this item, first clean the area this rule is going to be affixed to with acetone or a similar alcohol based cleaner. The bottom of this Kids Height Rule starts at 0, so begin by lining up this edge with the absolute bottom edge of your intended surface. Use another solid/non-malleable ruler (yard stick, tape measure, etc.) alongside this ruler-application process so you can tension the rule length to stay perfectly accurate. Peel the liner off the backside of the bottom end slowly, revealing the adhesive, and press firmly onto the wall. Continue to pull liner, reveal adhesive, and press onto surface with two hands, until you reach the top. Doing it this way is much easier than managing a long ruler with its entire adhesive exposed at once (imagine the messy tape clusters that can occur when wrapping a gift, multiplied by over 6 feet).

 
 
Part Number
Description
Price
KHR-MC4x80VU-GTC
Kids Height Rule, Inches/Feet graduations, 4" wide, reads to 80"
$17.95 each
 

 
Security Height Backdrop Rule, Wall Mount
 
Wall Mount Backdrops are large durable banners featuring a stunning and bold height gauge, similar to our Security Height Rules.  These backdrops are commonly purchased for police departments for use in criminal lineups and mug shot photography.  Other companies, like those in the medical field, use these tools as an easy height reference guide in their offices and examination rooms, and businesses have used them as the background when photographing shoplifters.
   
Each Wall Mount Backdrop is made of .010” thick reinforced White Banner material that has a smooth matte surface. The backdrop measures 24” wide by 54” long with measurements reading 3’0” to 7’0” in 1/2” increments.  Numbers read vertically up on both the left and right sides, with graduation lines extending solidly across the face of the backdrop.  3/16” diameter brass grommets are installed in each corner for hanging purposes (this unit is not adhesive backed).  Simply measure 3’0” from the ground, mark it, and hang the Wall Mount Backdrop with nails or thumb tacks through the grommet holes so that the backdrop’s lowest register (3’0”) lines up with the mark you just made.
Wall Mount Backdrops are individually packaged in 2” diameter shipping tubes with plastic caps on the ends.  Customizations and private labeling are available; please contact an ORC Forensics sales associate for more information.
 
Part Number
Description
Price
SHBRWM/F-W23x36/84VU-BAN
24" x 54" White Banner, Reading 3FT to 7FT
$30.00 each
SHBRWM/M-W0.58x0.9/2.1VU-BAN
58cm x 127cm White Banner, Reading 90cm to 210cm
$30.00 each
 
Google: Yahoo: MSN:

Home | Instructions | Request A Quote | Distributors | About Us

© Copyright 2006-2014 Oregon Rule Co.